Volcan V800 / V950
73 or 91 hp (Stage IIIA) professional isodiametric tractor. Low centre of gravity, wide wheel track and platform for mountain haymaking.
Volcan V800 and V950 MT are tractors characterized by maximum stability on slopes without sacrificing the ground clearance for a rational flow of the mowed fodder under the machine.
Particular attention has been paid to the driver’s comfort: 6 post rops and approved cabins make for a practical and comfortable driving experience.
Focus
To help heat disposal, the cooling system is supported by the Self Cleaning System™ which allows the engine and hydraulic system to always operate within the maximum safety margin.
The Dual Floating System™ optimizes the load on the ground of the equipment applied to the third point, promoting its ‘floating’.
Technical Data
Volcan V800 / V950 - MT
| Type | Isodiametric with driving position with platform suspended on silent block, configured for haymaking on mountains |
|---|---|
| Chassis | Steering wheels |
| Driving position | Reversible |
| Transmission | 16 + 16 |
| Synchronized reverser | Yes |
| Electro-hydraulic power shuttle EasyDrive® | n/a |
| Drive | 4WD with front-wheel drive disengagement |
| Hydraulic system | Dual circuit with independent pumps |
| Heat exchanger | Yes |
| Joystick | Optional. Proportional electronic control of lifts and control valves |
| Rear lifting capacity (kg) | 2300 (at the ball joint) |
| Front lift | Optional |
| PTO rotation speed (rpm) | 540 / 1000 (optional: 540 / 540E) |
| PTO engagement control | Electro-hydraulic |
| Service brakes | Multidisc in oil bath with hydrostatic control, acting on four wheels. Independent manoeuvring brakes acting on rear wheels |
| Cabin | Standard: 6-upright semi-cab. Optional: cab with heating and air-conditioning system |
n/a = not available
4 cylinders.
The reduction of fuel consumption and the maximization of engine performance are the results of the innovative technological approach that distinguishes the propellers supplied with the Volcan range.
Volcan range is equipped with two VM 4-cylinder engines which develop 73 hp (Volcan V800) or 91 hp (Volcan V950).
The EGR System – located inside the engines – provides for the recycling of the exhaust gases which, properly mixed, return to the combustion chamber, drastically reducing the NOx emissions and fuel consumption.
The balancing shafts reduce vibrations to the advantage of the heard noise and the higher operating comfort.
The air intake grille is also large to facilitate engine cooling.
The opening system of the tractor’s bonnet provides full access to the engine, facilitating routine maintenance operations.
Transmission.
Chassis.
Planetary reduction units.
Planetary reduction units
Superior quality axles
Planetary reduction units on the front and rear axles increase the torque transmitted to the four wheels to enable the tractor to move over difficult terrain characterised by mud, sand or major differences in altitude.
Hydraulic system.
Reserved to the driver.
Homologated cabs.
Additional options.
Self Cleaning System™
Self Cleaning System™
The SCS™ keeps the radiator and intake grilles of the engine bonnet constantly clean from dust and debris raised during work, avoiding dangerous overheating.
Front bumper
Robust steel accessory that combines style and functionality by protecting the bonnet and radiator grille from impact.
Front ballasts
Ballast weighing a total of 180 kg, designed for mounting on both sides of the bonnet so as not to increase the size of the tractor.
Not compatible with the front lift.
Front lift
Front lift equipped with quick-couplings cat. 1, front protection and four hydraulic outlets.
It is essential for combined equipment applications.
Lifting capacity: 800 kg
Not compatible with front ballasts and bumper.
