Bcs Products Specialized tractors International range Invictus K400 AR
International range

Invictus K400

AR  |  RS
Invictus-K400-card

36 hp (Stage IIIA) isodiametric tractor. Narrow wheel track, compact dimensions and reduced turning radii.

 

Invictus K400 AR is a multi-functional isodiametric tractor intended for hobby-farmers, semi-professionals and small farms specialised in greenhouses, vegetable gardens, nurseries and micro-row cultivations.

The OS-Frame and the power steering acting on the central joint of the tractor ensure agility between the rows and reduced turning radii.

Transmission 8+4
POWER 36 hp
Driving position monodirectional
MIN. WIDTH 989 mm
Invictus-K400-card
SALES NETWORK

AR | Articulated

The OS-Frame and the power steering acting on the central joint of the tractor ensure agility between the rows and reduced turning radii.

Technical Data

Invictus K400 - AR

Kubota V1505 – Stage IIIA
Power (kW/HP) 26.2 / 35.6
Nominal speed (rpm) 3000
Number of cylinders 4
Displacement (cm3) 1498
Aspiration Natural
Maximum torque (Nm/rpm) 96.5 / 2200
Type Isodiametric
Chassis Articulated
Driving position Monodirectional
Transmission 8 + 4
Drive Permanent 4WD
Hydraulic system Single-circuit
Joystick n/a
Rear lifting capacity (kg) 950 (at the ball joint)
Front lift n/a
PTO rotation speed (rpm) 540
PTO engagement control Mechanical
Service brakes Drum brakes acting on rear wheels
Cabin n/a

n/a = not available

Invictus-35-velocità

Tyres: 210/95 R16
Engine speed: 3000 rpm

Generous engine.

The Invictus K400 range is equipped with a 4-cylinder Kubota engine which develops a 36 hp @3000 rpm.

The performances, regarding both absolute power and torque, place the Kubota engine amongst the top performing in the category.

Water cooled, it ensures smooth and gradual power supply with minimum fuel consumption.

The exhaust pipe is located inside the front bumpers, freeing the bonnet from protruding elements.

The opening system of the tractor’s bonnet provides full access to the engine, facilitating routine maintenance operations.

Transmission.

The transmission has been created to last over time, particularly providing for reliability and performance without overlooking comfort and safety.

The 12-speed gearbox (8 in forward and 4 in reverse) makes it possible to always select the most appropriate gear for the job at hand.

The large dry single disc clutch grants gentle and immediate gear connection to guarantee the utmost in reliability and power transmission.

The maximum speed of 30 km/h also facilitates fast travel within the farm or on urban roads.

Integral frame.

The OS-Frame is equipped with a central articulation that allows oscillation at +/- 15°.

Front and rear are therefore independent; with the four wheels ripping the ground at all times to guarantee maximum traction and safety even when used on broken and sloped land.

The distribution of the weights on the axles, 40% on the rear and 60% on the front, is proved optimal once the rear lifting equipment is mounted.

Essentially, the rear load optimises the sharing of the weights on the two tractor axles to increase stability, safety and traction.

Hydraulic system.

The hydraulic system consists of a gear pump with a flow rate of 16.5 l/min and can supply up to 6 rear hydraulic outlets for the use of a wide range of equipment.

The 540 rpm PTO is transmission-dependent and synchronised for coupling with small self-propelled trailers or agricultural equipment requiring synchronisation with the tractor’s forward speed.

The rear hydraulic lift by two external cylinders is set up with a cat. 1 three-point connection, complete with stabilisers to restrict the equipment spinning laterally.

To ensure that the lift functions correctly, always check that the structural characteristics of the implements you intend to hitch to the tractor are suitable for the hitch itself. To avoid compromising regular operation of the lifting system, the weight of the implements must be less than the maximum load the lift can hold up.

Driving position.

The driver’s seat is tailor-made for the driver with all controls ergonomically positioned and easy to operate for full control of the tractor and equipment at all times.

Gearbox levers are positioned under the steering wheel to allow maximum accessibility to the driver’s seat.

The dashboard with its modern and elegant design houses the control instrumentation that provides the operator with all necessary data on the status of the tractor.