Ma.Tra. 250
Multi-purpose greens maintenance machine with hydrostatic transmission.
The Ma.Tra 250 is a professional hydrostatic lawn mower equipped with a front cutting unit and a raised discharge grass collector.
Designed for cutting and collecting grass from green areas, public and private parks, sports fields, road flowerbeds and roundabouts.
Reduced turning radii and stability, even on terrain with poor grip, are ensured by the short wheelbase and permanent drive supported by four independent hydraulic motors mounted on the wheels.
Technical Data
| Transmission | Hydrostatic with 4 hydraulic motors on the wheels and pedal control |
|---|---|
| Maximum speed (km/h) | 15 |
| Drive | 4WD |
| Differential lock | Automatic and manual with push-button control |
| Driving system | By steering wheel acting on the rear wheels |
| Cutting width (mm) | 1320 |
| Grass collector | Yes |
| Grass collector real capacity (lt) | 750 |
| Max. discharge height (mm) | 2000 |
| Cabin | No |
| Approx. hourly working capacity (mq/h) | 10000 |
| Width | 1280 mm (without lawn mower) | 1410 mm (with lawn mower) |
| Length | 2530 mm (without lawn mower) | 3200 mm (with lawn mower) |
| Height | 2100 mm (with roll-bar raised) | |
| Wheelbase | 1230 mm | |
| Ground clearance | 150 mm | |
| Weight | 1100 kg (without lawn mower) | 1280 kg (with lawn mower) |
High level performance.
The Stage V engine is equipped with a specific sensor that automatically reverses the rotation of the cooling fan to clean the intake grilles from dust and grass debris.
The transmission is supported by four independent hydraulic motors, mounted on the wheels, that make it possible for the Ma.Tra. 250 to easily work, even on slopes and on terrain with poor adherence.
Drive and safety are also ensured by the automatic differential lock that ensures the four-wheel drive is always engaged, this can also be done manually by pressing a button.
The PTO clutch is hydraulic multidisc with built-in blade brake.
Absolute operating comfort.
The driving position is wide and comfortable with a professional sprung seat with armrests and all the hydraulic controls at hand and easily operated.
The Ma.Tra 250 is standard equipped with:
- tilt adjustable steering column
- folding roll-bar
- seat belts
- lighting system approved for use on roads
- rear tow hitch
Attachments.
132 cm lawn mower
With rear discharge and collection set-up, it has a 132 cm cutting width and is equipped with gear transmission and hydraulically-controlled lifting to easily overcome curbs and pavements.
The blades are mounted on two discs and have shockproof pivoting ends to protect the transmission from any impacts against obstacles.
The cutting height can be constantly adjusted from the driver’s seat by pressing a button.
A practical mulching kit is also standard supplied for mowing without grass collection.
130 cm heavy duty mower
Designed for cleaning rustic areas, the 130 cm wide mobile blade heavy duty mower cuts and shreds shrubs and scrubs without collection.
It is equipped with a central rotor with Y-shaped blades and a rear roller for adjusting the cutting height.
150 cm snow blade
This implement is essential for removing snow or handling sand and stones, and has a width of 150 cm.
Equipped with a rubber end, it can be hydraulically adjusted (+/-30°) directly from the driver’s seat thanks to the front hydraulic control valves standard mounted on the Ma.Tra 250.
Large grass collector.
The grass collection system includes a load accelerator which, in addition to ensuring maximum yield even with thick and humid grass, reduces its noise and consumption.
The disengagement button is independent from the PTO button.
The grass collector has a 750 litre capacity (gross internal volume of 950 litres). A mobile baffle located inside ensures uniform filling.
When the grass collector is filled, the lawn mower blades and load accelerator automatically stop.
The 200 cm high hydraulic lifting and tipping and the 20 cm rear overhang optimise grass unloading in the body of the support vehicle.
