Stage V | SDT tractors

Eagle 85


75 hp (Stage V) super low professional tractor with differentiated wheels. Reduced dimensions and short wheelbase for an ideal weight/power ratio.


Eagle 85 RS is a low and compact tractor ideal to work in greenhouses, orchards and vineyards also on slopes, pergola and canopy farms or characterised by low foliage.

The new design, with a compact bonnet and 8 cm lower, ensures high visibility.

The new, low profile, pressurised and Category 4 approved “Compact Pro” cab (optional) ensures full operator protection.

Transmission 16+16
POWER 75 hp
Driving position monodirectional
MIN. WIDTH 1363 mm

SDT | Steering wheels

The oversized rear wheels, available in 20 or 24”, ensure high lifting capacity (2700 kg) and traction on any type of ground.

The OS-Frame and the steering acting on the front wheels ensure stability and adherence in any operating condition, even on slopes.

The standard manoeuvring brakes further reduce the turning radius for more agility between the rows.

The Eagle 85 range is also available in the Dualsteer® version.

Technical Data

Eagle 85 - RS

Kohler KDI 2504 TCR – Stage V
Power (kW/HP) 55.4 / 75.3
Nominal speed (rpm) 2300
Number of cylinders 4 in-line / 16 valves
Displacement (cm3) 2482
Aspiration Turbo / Intercooler
Maximum torque (Nm/rpm) 300 / 1500
Type Differentiated wheels and short wheelbase with driving position with platform suspended on silent block
Chassis Steering wheels
Driving position Monodirectional
Transmission 16 + 16 with Easy Plus™ clutch and Smart Brake & Go
Synchronized reverser Yes with Power Clutch System button
Electro-hydraulic power shuttle EasyDrive® Optional
Drive 4WD with front-wheel drive disengagement
Hydraulic system Dual circuit with independent pumps
Heat exchanger Yes
Joystick Optional. Proportional electronic control of lifts and control valves, potentiometer for adjusting the hydraulic flow rate and remote control for PTO engagement
Rear lifting capacity (kg) 2700 (at the ball joint)
Front lift Optional
PTO rotation speed (rpm) 540 / 540E (optional: 540 / 1000)
PTO engagement control Electro-hydraulic
Service brakes Multi disc in oil bath with hydrostatic control, acting on four wheels. Independent manoeuvring brakes acting on rear wheels
Cabin Optional: 'Compact Pro' low-profile, pressurised and homologated cat. 4, with heating and air-conditioning system

Tyres: 420/65 R24 – 320/70 R24
Engine speed: 2300 rpm

TOP of the range contents.

Rich standard equipment:

  1. Driver’s position with platform suspended on silent-blocks.
  2. Transmission with Easy Plus™ electro-hydraulic clutch with multiple discs in oil bath and Power Clutch System and Smart Brake & Go functions.
  3. Clutch pedal with Pro-Act System for a more comfortable drive.
  4. Dual circuit hydraulic system with two independent pumps and heat exchanger.
  5. Service brakes on the four wheels.
  6. High automotive standard vehicle control unit.
  7. Front LED work lights.
  8. High fuel autonomy (78 litres in the version with roll-bar).


And a broad range of optional devices:

  1. Pressurised and homologated cab Category 4.
  2. Transmission with EasyDrive® electro-hydraulic reverser.
  3. Electronically controlled joystick with CAN-bus technology.
  4. Hydraulic circuit with increased capacity for lifter and directional control valves.
  5. Rear lift with L-shaped arms and quick couplings.
  6. Front lift equipped with hydraulic outlets.
  7. Wide choice of seats.
  8. Self Cleaning System™ for automatic radiator cleaning.
  9. Brake-Off automatic parking brake.
  10. 24” rear wheels also available with cab.

Clean power.

The Eagle 85 range is equipped with 75 hp 4-cylinder Turbo Intercooler engine – fully compliant with the Stage V emissions regulations – with particulate filter, that BCS Group worked on in collaboration with Kohler, their technological partner, for an advanced regeneration strategy guaranteeing maximum performance and reducing machine downtime to a minimum.

The rpm are electronically controlled quickly and precisely through a console positioned to the right of the steering wheel with functions of:

  • speed up/down,
  • set speed storage/recall,
  • switching off the electronic accelerator and switching to minimum speed.

Renewed transmission.

Easy Plus™ clutch

Always smooth and progressive engagements.

The multidisc clutch in oil bath with hydraulic control is controlled by a new software that filters any poor use of the clutch pedal by the operator, avoiding jerky start-up.

Thanks to the Easy Plus™ clutch, progressive engagement is guaranteed, without jerky movements and wear.

Find out more

Power Clutch System

Quick shifting for maximum operational comfort.

Using the button located on the reverser lever and gears, the operator can change the direction of the tractor or change speed without using the clutch pedal, for maximum operating comfort.

Find out more

Smart Brake & Go

Assisted stop and restart control.

The system, which is activated from a button on the dashboard, makes it possible to stop the tractor and restart by acting only on the brake pedal without using the clutch.

Find out more
Smart Brake and Go

EasyDrive® electro-hydraulic reverser.

EasyDrive® electro-hydraulic reverser

Total control.

Optionally, the transmission can be equipped with the exclusive EasyDrive® electro-hydraulic reverser (standard on AI-Tractor).

The practical lever, on the left of the steering wheel, allows the operator to reverse the driving direction without using the clutch pedal and without lifting the hands from the steering wheel, while always keeping the vehicle control at all times.

Find out more
Inversore EasyDrive

Lift and hydraulics.

The hydraulic system features double circuit with independent pumps and heat exchanger for oil cooling.

The over-sized flow rate to the pumps (a full 51 l/min in the increased version) allows use with all modern equipment intended for specialised farming.

The new electronically controlled proportional joystick uses CAN-bus technology and integrates the PTO engagement button and potentiometer to adjust the hydraulic flow rate.

The robust rear lift has a 2700 kg lifting capacity at the ball joints.

A high performing front lift is available as an optional, featuring hydraulic outlets, essential for use with combined attachments.

Absolute comfort.

The driving position is comprised of a platform suspended on a silent-block to reduce vibrations and noise.

The controls are set up ergonomically and in a way that offers easy operation, and from the operator’s seat there is a full unobstructed view of both machine and tool.

Maximum protection!

'Compact Pro' cab

Low profile and certification Cat. 4

The low chassis with height off the ground of only 176 cm makes use under the foliage, in pergola vineyards, canopy plantations and greenhouses extremely easy.

Pressurised and homologated in Cat. 4, isolates the operator from harmful inhalations during treatments with phytosanitary agents, making the work environment healthy and safe.

Find out more

Exclusive optional devices.

Self Cleaning System™

Self Cleaning System™

The SCS™ keeps the radiator and intake grilles of the engine bonnet constantly clean from dust and debris raised during work, avoiding dangerous overheating.

Find out more

Front bumper

Robust steel accessory that combines style and functionality by protecting the bonnet and radiator grille from impact.

In the configuration with front lift, it integrates the linkage of third point tie rod.


Front ballasts

Ballast weighing a total of 150 kg, designed for mounting on both sides of the bonnet so as not to increase the size of the tractor.

Not compatible with the front lift.


Front lift

Front lift equipped with quick-couplings cat. 1, front bumper and four hydraulic outlets.

It is essential for combined equipment applications.

Lifting capacity: 800 kg

Not compatible with the front ballasts.


They might also interest you: